この問題集の合格率は高いので、多くのお客様からAZ-500試験復習赤本問題集への好評をもらいました。AZ-500試験復習赤本問題集のカーバー率が高いので、勉強した問題は試験に出ることが多いです。だから、弊社の提供するAZ-500試験復習赤本問題集を暗記すれば、きっと試験に合格できます。 あなたのMicrosoftのAZ-500試験復習赤本試験準備のどの段階にあっても、当社のソフトウェアは、あなたの最高のヘルパープロフォーマになることができます。我々はMicrosoftのAZ-500試験復習赤本試験のデータを整理したり、分析したりするため、経験豊富なエリートチームにそれを完了させます。 Sweetmayhemcakesは同業の中でそんなに良い地位を取るの原因は弊社のかなり正確な試験の練習問題と解答そえに迅速の更新で、このようにとても良い成績がとられています。

解決法はAZ-500試験復習赤本問題集は購入することです。

Microsoft Azure Security Engineer Associate AZ-500試験復習赤本 - Microsoft Azure Security Technologies IT認証は同業種の欠くことができないものになりました。 そのデモはAZ-500 対応資料試験資料の一部を含めています。私たちは本当にお客様の貴重な意見をAZ-500 対応資料試験資料の作りの考慮に入れます。

Sweetmayhemcakesに会ったら、最高のトレーニング資料を見つけました。SweetmayhemcakesのMicrosoftのAZ-500試験復習赤本試験トレーニング資料を持っていたら、試験に対する充分の準備がありますから、安心に利用したください。Sweetmayhemcakesは優れたIT情報のソースを提供するサイトです。

Microsoft AZ-500試験復習赤本 - 君の夢は1歩更に近くなります。

AZ-500試験復習赤本認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いまAZ-500試験復習赤本試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいAZ-500試験復習赤本試験に関連する参考書が登場しますよ。それはSweetmayhemcakesのAZ-500試験復習赤本問題集です。気楽に試験に合格したければ、はやく試しに来てください。

Sweetmayhemcakesの助けのもとで君は大量のお金と時間を费やさなくても復楽にMicrosoftのAZ-500試験復習赤本認定試験に合格のは大丈夫でしょう。ソフトの問題集はSweetmayhemcakesが実際問題によって、テストの問題と解答を分析して出来上がりました。

AZ-500 PDF DEMO:

QUESTION NO: 1
You have an Azure subscription that contains the virtual networks shown in the following table.
The subscription contains the virtual machines shown in the following table.
On NIC1, you configure an application security group named ASG1.
On which other network interfaces can you configure ASG1?
A. NIC2, NIC3, NIC4, and NIC5
B. NIC2 only
C. NIC2, NIC3, and NIC4 only
D. NIC2 and NIC3 only
Answer: D
Explanation
Only network interfaces in NVET1, which consists of Subnet11 and Subnet12, can be configured in
ASG1, as all network interfaces assigned to an application security group have to exist in the same virtual network that the first network interface assigned to the application security group is in.
Reference:
https://azure.microsoft.com/es-es/blog/applicationsecuritygroups/

QUESTION NO: 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to rt As a result, these questions will not appear in the review screen.
You have an Azure subscription named Sub1.
You have an Azure Storage account named Sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in Sal by using several shared access signatures {SASs) and stored access policies.
You discover that unauthorized users accessed both the rile service and the blob service.
You need to revoke all access to Sa1.
Solution: You regenerate the access keys.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation
Instead you should create a new stored access policy.
To revoke a stored access policy, you can either delete it, or rename it by changing the signed identifier.
Changing the signed identifier breaks the associations between any existing signatures and the stored access policy. Deleting or renaming the stored access policy immediately affects all of the shared access signatures associated with it.
Reference:
https://docs.microsoft.com/en-us/rest/api/storageservices/Establishing-a-Stored-Access-Policy

QUESTION NO: 3
Provide a description of the secret, and a duration. When done, select Add.
After saving the client secret, the value of the client secret is displayed. Copy this value because you aren't able to retrieve the key later. You provide the key value with the application ID to sign in as the application.
Store the key value where your application can retrieve it.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/develop/howto-create-service-principal- portal
4. You need to deploy Microsoft Antimalware to meet the platform protection requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
Scenario: Microsoft Antimalware must be installed on the virtual machines in RG1.
RG1 is a resource group that contains Vnet1, VM0, and VM1.
Box 1: DeployIfNotExists
DeployIfNotExists executes a template deployment when the condition is met.
Azure policy definition Antimalware
Reference:
https://docs.microsoft.com/en-us/azure/governance/policy/concepts/effects
5. You have an Azure subscription that contains a user named User1 and an Azure Container
Registry named ConReg1.
You enable content trust for ContReg1.
You need to ensure that User1 can create trusted images in ContReg1. The solution must use the principle of least privilege.
Which two roles should you assign to User1? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. AcrPush
B. AcrQuarantineReader
C. Contributor
D. AcrImageSigner
E. AcrQuarantineWriter
Answer: A,D
Explanation
References:
https://docs.microsoft.com/en-us/azure/container-registry/container-registry-content-trust
https://docs.microsoft.com/en-us/azure/container-registry/container-registry-roles
6. You have an Azure subscription that contains a virtual machine named VM1.
You create an Azure key vault that has the following configurations:
* Name: Vault5
* Region: West US
* Resource group: RG1
You need to use Vault5 to enable Azure Disk Encryption on VM1. The solution must support backing up VM1 by using Azure Backup.
Which key vault settings should you configure?
A. Access policies
B. Locks
C. Keys
D. Secrets
Answer: A
Explanation
References:
https://docs.microsoft.com/en-us/azure/key-vault/key-vault-secure-your-key-vault
7. You have an Azure SQL database.
You implement Always Encrypted.
You need to ensure that application developers can retrieve and decrypt data in the database.
Which two pieces of information should you provide to the developers? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. the column master key
B. a shared access signature (SAS)
C. the column encryption key
D. user credentials
E. a stored access policy
Answer: A,C
Explanation
Always Encrypted uses two types of keys: column encryption keys and column master keys. A column encryption key is used to encrypt data in an encrypted column. A column master key is a key- protecting key that encrypts one or more column encryption keys.
References:
https://docs.microsoft.com/en-us/sql/relational-databases/security/encryption/always-encrypted- database-engine
8. Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Azure Username: [email protected]
Azure Password: Ag1Bh9!#Bd
The following information is for technical support purposes only:
Lab Instance: 10598168
You need to email an alert to a user named [email protected] if the average CPU usage of a virtual machine named VM1 is greater than 70 percent for a period of 15 minutes.
To complete this task, sign in to the Azure portal.
Answer:
See the explanation below.
Explanation
Create an alert rule on a metric with the Azure portal
1. In the portal, locate the resource, here VM1, you are interested in monitoring and select it.
2. Select Alerts (Classic) under the MONITORING section. The text and icon may vary slightly for different resources.
3. Select the Add metric alert (classic) button and fill in the fields as per below, and click OK.
Metric: CPU Percentage
Condition: Greater than
Period: Over last 15 minutes
Notify via: email
Additional administrator email(s): [email protected]
Reference:
https://docs.microsoft.com/en-us/azure/sql-database/sql-database-insights-alerts-portal
9. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You use Azure Security Center for the centralized policy management of three Azure subscriptions.
You use several policy definitions to manage the security of the subscriptions.
You need to deploy the policy definitions as a group to all three subscriptions.
Solution: You create a policy definition and assignments that are scoped to resource groups.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation
References:
https://4sysops.com/archives/apply-governance-policy-to-multiple-azure-subscriptions-with- management-groups

QUESTION NO: 4
Select Client secrets -> New client secret.

QUESTION NO: 5
Select Certificates & secrets.

Fortinet NSE5_FMG-7.2-JPN - もし不合格になったら、私たちは全額返金することを保証します。 ISACA CISA-KR - 。 SweetmayhemcakesのMicrosoftのHuawei H19-260_V2.0試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。 IBM C1000-172 - 最新の資源と最新の動態が第一時間にお客様に知らせいたします。 我々の目的はあなたにMicrosoftのPECB ISO-IEC-27001-Lead-Auditor試験に合格することだけです。

Updated: May 28, 2022